RSX-11M V3.2 BL26 1920K MAPPED >RED DB:=SY: >RED DB:=LB: >MOU DB:SYSGENBL26 >@DB:[1,2]STARTUP >* PLEASE ENTER TIME AND DATE (HR:MN DD-MMM-YY) [S]: Connected to the PDP-11 simulator CON-TELNET device 31-mar-19 14:45 >TIM 31-mar-19 14:45 >* ENTER LINE WIDTH OF THIS TERMINAL [D D:132.]: >SET /BUF=TI:132. >set /pub=db1: >mou db1:USERDIRS >ACS SY:/BLKS=512. >; >; NOTE - The Baseline INDirect must be replaced by BIGIND with >; a priority of 10. for SYSGEN. >; >; ie >REM ...AT. >; >INS $BIGIND/PRI=10. >; >@ >m\m\asn\nsa\ >set /crt=ti: >all db2: >mou db2:/ovr >all dl1: >mou dl1:rsxm26 >edi db2:[200,200]syssaved.cmd [00036 LINES READ IN] [PAGE 0] *pl $DZ0 [00036 LINES READ IN] [00036 LINES READ IN] [00028 LINES READ IN] .SETS $$DZ0 "300,160100,7" *ch /300/310 .SETS $$DZ0 "310,160100,7" * .SETS $$DZ1 "310,160110,7" *ch /310/320 .SETS $$DZ1 "320,160110,7" *ex [EXIT] >pip dl1:[200,200]/nv/fo/ =db2:    db2:[200,200]syssaved.cmd >rem ...at. >ins $bigind/pri=10. INS -- WARNING - PRIVILEGED TASK OVERMAPS I/O PAGE >asn dl1:=sy: >set /uic=[200,200] >@sysgen >; >; RSX-11M Ver. 3.2 BL26 System Generation 3.2.3a done on 31-MAR-19 at 14:55:34 >; >; Copyright (C) 1979 Digital Equipment Corporation, Maynard Mass. >; >; RL01 distribution kit >; >* 1. Inhibit MCR command lines (Type for explanation)? [Y/N]: >* 2. Have you made a copy of the distribution kit? [Y/N]:y >* 3. Use saved or canned answer file for input responses? [Y/N]:y >* 4. Undefined answer wakeup? [Y/N]:y >* 5. Use saved host configuration? [Y/N]:y >* 6. Use saved peripheral configuration? [Y/N]:y >* 7. Skip end of section (EOS) breakpoints? [Y/N]:y >* 8. Skip end of execution (EOX) breakpoints? [Y/N]:y >* 10. Save responses (i.e.: create SYSSAVED.DAT)? [Y/N]: >* 11. UIC for SYSSAVED files if not [200,200] [S]: >* 12. UIC for SYSGEN command files if not [200,200] [S]: >* 13. Clean up files from previous GENs? [Y/N]:y >; >; Saved-answer file created 28-MAR-19 AT 16:11:29 by SYSGEN version 3.2.3a >; >* 14. Device, when ready, for Executive sources (ddu:) [S]: dl2: >; >MOU DL2:MAPSRC >ASN DL2:=LB: >; >SET /UIC=[1,1] >PIP [1,20]RSXBLD.CMD;*/DE/NM,SYSPAR;* >PIP [1,24]RSXBLD.CMD;*/DE/NM,TTDRVBLD;*,SYSPAR;* >PIP [1,50]SYSVMR.CMD;*/DE/NM,[1,54]SYSVMR;* >PIP [11,20]*.OBJ;*/DE/NM,*.UDC;*,*.ICR;*,*.IDS;*,*.PCS;* >PIP [11,20]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,RSXBLD;* >PIP [11,24]*.OBJ;*/DE/NM,*.UDC;*,*.ICR;*,*.IDS;*,*.TTY;*,*.PCS;* >PIP [11,24]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,RSXBLD;* >PIP [11,10]SYSTB.MAC;*/DE/NM,ICTAB;*,RSXMC;*,[200,200]SGNPARM.CMD;* >PIP [11,10]RSXASM.CMD;*/DE/NM,RSXDRVASM;*,RSXBLD;* >PIP /FR DL1: HAS 5706. BLOCKS FREE, 4534. BLOCKS USED OUT OF 10240. LARGEST CONTIGUOUS SPACE = 3493. BLOCKS >SET /UIC=[11,10] >; >; Target configuration >; >; Processor:11/70 Memory Size:128K,Mapped System:RSX-11M >; >; Host configuration >; >; Executive Options >; >; Terminal driver options >; >; Thinking ... >; >; End of Executive option generation at 14:56:17 on 31-MAR-19 >; >; Peripheral configuration >; >; Parameters appearing in square brackets "[...]" can only be >; specified for the first controller of a particular device. >; Parameters appearing in parentheses "(...)" only need be specified >; if the indicated option is present on the target system. >; >; The default for loadable drivers has been set to *TRUE*. >; To override this setting enter R (resident) as the first parameter >; for the first controller of the specified device. >; >; A/D and Laboratory devices: None specified >; >; Interprocessor communication devices: None specified >; >; Unit record devices: CR, LP, PR, PP >; >; Disks: DB, DD, DK, DL, DM, DT, DY >; >; Tapes: CT, MM >; >; Non-physical (pseudo) devices: CO, TT, NL, TI, CL, LB, SY >; >SET /UIC=[1,24] ! Creating TTDRVBLD.CMD >SET /UIC=[11,10] >; End of interrupt vector area has been set to 400 >; >; >; Create Executive build files >; >PIP RSXMC.MAC=LB:RSXMC0.MAC/AP >; >; Assemble the Executive >; >PIP [11,24]/NV=RSXASM.CMD,RSXDRVASM.CMD >PIP RSXASM.CMD;0/DE,RSXDRVASM;0 >INS SY:$BIGMAC INS -- PARTITION PAR14K NOT IN SYSTEM, DEFAULTING TO GEN >;SET /COFFEEBREAK=TI: Start of Executive assembly at 14:56:39 on 31-MAR-19 >SET /UIC=[11,24] >MAC @RSXASM >;SET /NOCOFFEEBREAK=TI: Executive assembly ended at 14:58:22 on 31-MAR-19 >;SET /COFFEEBREAK=TI: Start of device drivers assembly at 14:58:22 on 31-MAR-19 >SET /UIC=[11,24] >MAC @RSXDRVASM >;SET /NOCOFFEEBREAK=TI: Device drivers assembly ended at 14:59:53 on 31-MAR-19 >REM MAC >; >; Prepare for task building >; >PIP RSX.OBS=*.OBJ >PIP *.OBJ;*/DE/NM >PIP RSX11M.OBJ/RE=RSX.OBS >PIP TTDRV.OBJ=*.TTY >PIP *.TTY;*/DE/NM >SET /UIC=[1,24] >PIP /NV=[11,10]RSXBLD.CMD >; >; >; End of SYSGEN phase I at 14:59:57 on 31-MAR-19 >; -- To continue type: @[200,200]SYSGEN2 >; >SET /UIC=[200,200] >@ > > >;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; >Prepare for Sysgem n phase II MCR -- TASK NOT IN SYSTEM > >pip PIP>db:[1,34]*.*;*/de,db:[11,10]*.*;* PIP -- DIRECTORY WRITE PROTECTED DB:[1,34]*.*;* -- PRIVILEGE VIOLATION PIP -- DIRECTORY WRITE PROTECTED DB:[11,10]*.*;* -- PRIVILEGE VIOLATION PIP>set /ui       ^Z >set /uic=[1,1] >pip PIP>db:[1,34]*.*;*/de,db:[11,10]*.*;* PIP>db:[11,10]/nv/fo/cd=dl2:[11,10]ADDRV.MAC;,AFDRV.MAC;,ARDRV.MAC; PIP>db:[11,10]/nv/fo/cd=dl2:[11,10]ICDRV.MAC;,IPDRV.MAC;,ISDRV.MAC; PIP>db:[11,10]/nv/fo/cd=dl2:[11,10]LADRV.MAC;,LSDRV.MAC;,UDDRV.MAC; PIP>db:[11,10]/nv/fo/cd=dl2:[11,10]XBDRV.MAC;,XLDRV.MAC;,XMDRV.MAC; PIP>db:[11,10]/nv/fo/cd=dl2:[11,10]XPDRV.MAC;,XQDRV.MAC;,XUDRV.MAC; PIP>db:[11,10]/nv/fo/cd=dl2:[11,10]XWDRV.MAC; PIP>dl2:[11,10]ADDRV.MAC;*/de,AFDRV.MAC;*,ARDRV.MAC;* PIP>dl2:[11,10]ICDRV.MAC;*/de,IPDRV.MAC;*,ISDRV.MAC;* PIP>dl2:[11,10]LADRV.MAC;*/de,LSDRV.MAC;*,UDDRV.MAC;* PIP>dl2:[11,10]XBDRV.MAC;*/de,XLDRV.MAC;*,XMDRV.MAC;* PIP>dl2:[11,10]XPDRV.MAC;*/de,XQDRV.MAC;*,XUDRV.MAC;*,XWDRV.MAC;* PIP>^Z > >;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; >;;; OK now run Sysgen phase II > >set /uic=[200,200] >@sysgen2 >; >; RSX-11M Version 3.2 System Generation Phase II started 31-MAR-19 at 15:07:22 >; >; Copyright (C) 1979 Digital Equipment Corporation, Maynard Mass. >; >* 1. In what UIC is SGNPARM.CMD if not [200,200] [S]: >; >; RL01 distribution kit SYSGEN versions 3.2.3a / 2:3.2.2d for RSX11M BL26 >; >; Continuation from SYSGEN phase I done on 31-MAR-19 at 14:59:57 >; >; The map device ( DB: ) must already be mounted with UIC [1,34]. >; If it is not, ^Z SYSGEN2 at the next question and do so. >; >* 2. Expanded comments desired for SYSGEN phase II? [Y/N]: >* 3. Is SYSGEN still running on-line? [Y/N]:y >* 5. If not in DL2: enter object files device when ready (ddu:) [S]: >; >MOU DL2:MAPSRC >ASN DL2:=LB: >ASN SY:=TK: >PIP /FR DL1: HAS 5336. BLOCKS FREE, 4904. BLOCKS USED OUT OF 10240. LARGEST CONTIGUOUS SPACE = 3493. BLOCKS >* 6. Have you already built the libraries, the Exec, and the loadable drivers? [Y/N]: >; >; Start of Executive and driver build phase at 15:08:02 on 31-MAR-19 >; >; >; Create system libraries at 15:08:02 on 31-MAR-19 >; >INS $LBR >SET /UIC=[1,1] >PIP ANSLIB.OLB/NV=SYSLIB.OLB >LBR ANSLIB/RP=LB:FCSMTA MODULE "ANSPAD" REPLACED MODULE "ASSLUN" REPLACED MODULE "BIGBUF" REPLACED MODULE "CLOSE " REPLACED MODULE "CREATE" REPLACED MODULE "DIRECT" REPLACED MODULE "GET " REPLACED MODULE "GETSQ " REPLACED MODULE "OPEN " REPLACED MODULE "OPFID " REPLACED MODULE "OPFNB " REPLACED MODULE "POINT " REPLACED MODULE "PUT " REPLACED MODULE "PUTSQ " REPLACED MODULE "RDWAIT" REPLACED MODULE "RETADR" REPLACED MODULE "RWBLK " REPLACED MODULE "WATSET" REPLACED MODULE "WTWAIT" REPLACED >SET /UIC=[1,24] >PIP RSX11M.OLB;*/DE/NM,TTDRV;* >LBR RSX11M/CR:80.:640.:256.=[11,24]RSX11M.OBJ LBR -- *FATAL*-EPT OR MNT EXCEEDED IN RSX11M.OBJ;1 >LBR TTDRV/CR:52.:256.:64.=[11,24]TTDRV.OBJ >PIP LB:/NV=LB:MCR.OLB >LBR LB:MCR/RP=LB:MCRTTFD MODULE "SETOV " REPLACED MODULE "SPROV " REPLACED MODULE "SDSOV " REPLACED >INS SY:$BIGTKB INS -- PARTITION PAR14K NOT IN SYSTEM, DEFAULTING TO GEN >; >; Taskbuild the Executive and the terminal driver at 15:08:13 on 31-MAR-19 >; >PIP [1,34]*.*;*/DE/NM >TKB @RSXBLD TKB -- *FATAL*-LIBRARY FILE RSX11M.OLB;1 HAS INCORRECT FORMAT >; >* EOX * Did the Executive build successfully? [Y/N]: >; >; We will pause now so that you can correct the problem. After >; resuming, we will build the Executive again. AT. -- PAUSING. TO CONTINUE TYPE "RES ...AT." >pip rsx11m.olb;*/de >lbr rsx11m/cr:83.:660.:265.=[11,24]rsx11m.obj >res ...at. AT. -- CONTINUING > >PIP [1,34]*.*;*/DE/NM >TKB @RSXBLD >; >* EOX * Did the Executive build successfully? [Y/N]:y >; >SET /UIC=[1,54] >PIP LB:/NV=RSX11M.STB >SET /UIC=[1,24] >TKB @TTDRVBLD >; >* EOX * Did the terminal driver build successfully? [Y/N]:y >; >* 10. List Executive map? [Y/N]: >; >; Build Loadable drivers >; >* 6. Device for driver's maps [D: NL:] [S]: db: >* 9. Build all selected loadable drivers into DRVPAR? [Y/N]:y >; >TKB @[200,200]CODRVBLD >PIP [200,200]CODRVBLD.CMD;*/DE >PIP [1,54]CODRV.STB/TR >TKB @[200,200]CRDRVBLD >PIP [200,200]CRDRVBLD.CMD;*/DE >PIP [1,54]CRDRV.STB/TR >TKB @[200,200]CTDRVBLD >PIP [200,200]CTDRVBLD.CMD;*/DE >PIP [1,54]CTDRV.STB/TR >TKB @[200,200]DBDRVBLD >PIP [200,200]DBDRVBLD.CMD;*/DE >PIP [1,54]DBDRV.STB/TR >TKB @[200,200]DDDRVBLD >PIP [200,200]DDDRVBLD.CMD;*/DE >PIP [1,54]DDDRV.STB/TR >TKB @[200,200]DKDRVBLD >PIP [200,200]DKDRVBLD.CMD;*/DE >PIP [1,54]DKDRV.STB/TR >TKB @[200,200]DLDRVBLD >PIP [200,200]DLDRVBLD.CMD;*/DE >PIP [1,54]DLDRV.STB/TR >TKB @[200,200]DMDRVBLD >PIP [200,200]DMDRVBLD.CMD;*/DE >PIP [1,54]DMDRV.STB/TR >TKB @[200,200]DTDRVBLD >PIP [200,200]DTDRVBLD.CMD;*/DE >PIP [1,54]DTDRV.STB/TR >TKB @[200,200]DYDRVBLD >PIP [200,200]DYDRVBLD.CMD;*/DE >PIP [1,54]DYDRV.STB/TR >TKB @[200,200]LPDRVBLD >PIP [200,200]LPDRVBLD.CMD;*/DE >PIP [1,54]LPDRV.STB/TR >TKB @[200,200]MMDRVBLD >PIP [200,200]MMDRVBLD.CMD;*/DE >PIP [1,54]MMDRV.STB/TR >TKB @[200,200]PPDRVBLD >PIP [200,200]PPDRVBLD.CMD;*/DE >PIP [1,54]PPDRV.STB/TR >TKB @[200,200]PRDRVBLD >PIP [200,200]PRDRVBLD.CMD;*/DE >PIP [1,54]PRDRV.STB/TR >; >; End of library, Executive and driver build phase at 15:13:50 on 31-MAR-19 >; >; Start task building privileged tasks at 15:13:50 on 31-MAR-19 >; >* 11. FCP desired (Type for explanation) [D: MIDDLE] [S]: PLAS >* 13. Build the unprivileged queue manager utilities? [Y/N]:y >* 14. Build the task PMD? [Y/N]:y >* 15. Build RMDEMO? [Y/N]:y >; >; Note that the following task-builds will be executed for your system: >; >; BOOBLD DMOBLD COTBLD FCPRO2BLD INDBLD INIBLD INSBLD >; MCRMUBLD MOUBLD QMGBLD QMGCLIBLD QMGPRTBLD LPPBLD F11MSGBLD >; MTABLD SAVBLD TKNBLD UFDBLD LOABLD UNLBLD PMDBLD >; RMDBLD SHFBLD ACNTBLD BYEBLD HELBLD BROBLD SHUTUPBLD >; ACSBLD ERFBLD ERLBLD >; >* 17. Edit any privileged task build files? [Y/N]: >* 18. Map device for privileged tasks (ddu:) [D: NL:] [S]: db: >; >ASN DB:=MP: >* 18. Is DB: mounted as a Files-11 volume with UFD [1,34]? [Y/N]:y >ASN LB:=SY: >ASN =LB: >ASN =SY: >ASN DL2:=SY: >ASN DL1:=LB: >TKB @BOOBLD >TKB @DMOBLD >TKB @COTBLD >TKB @FCPRO2BLD >TKB @INDBLD ! GENERATING SMALL INDIRECT >TKB @INIBLD >TKB @INSBLD >TKB @MCRMUBLD >TKB @MOUBLD >TKB @QMGBLD >TKB @QMGCLIBLD >TKB @QMGPRTBLD >TKB @LPPBLD >TKB @F11MSGBLD >TKB @MTABLD >TKB @SAVBLD >TKB @TKNBLD >TKB @UFDBLD >TKB @LOABLD >TKB @UNLBLD >TKB @PMDBLD >TKB @RMDBLD >TKB @SHFBLD >TKB @ACNTBLD >TKB @BYEBLD >TKB @HELBLD >TKB @BROBLD >TKB @SHUTUPBLD >TKB @ACSBLD >TKB @ERFBLD >TKB @ERLBLD >; >* EOX * Did the privileged tasks build successfully? [Y/N]:y >; >; End of privileged task builds at 15:19:34 on 31-MAR-19 >; >REM TKB >ASN LB:=SY: >ASN =LB: >ASN =SY: >ASN DL1:=SY: >ASN DL2:=LB: >SET /UIC=[1,54] >PIP /FR DL1: HAS 3517. BLOCKS FREE, 6723. BLOCKS USED OUT OF 10240. LARGEST CONTIGUOUS SPACE = 3463. BLOCKS >; >; SGN -- SYSGEN will now pause to allow you to create your >; RSX11M.SYS file using the following example. Ideally >; your system it should occupy the same number of blocks >; as indicated in the example. >; >; PIP RSX11M.SYS/NV/CO/BL:498.=RSX11M.TSK AT. -- PAUSING. TO CONTINUE TYPE "RES ...AT." >;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; >;;; Set up the target disk. will b pu          , pu                          Create target disk to receive generated system. > >;;; Initialize and mount the target disk >set /uic=[1,1] >all db2: ALL -- DEVICE MOUNTED > >> asn db2:=sy: >ini sy:rsxm26patchE/lru=7/mxf=25000 INI -- VOLUME MOUNTED FILES-11 >dmo db2:/dev DMO -- TT0: DISMOUNTED FROM DB2: *** FINAL DISMOUNT *** *** DB2: -- DISMOUNT COMPLETE >ini sy:rsxm26patchE/lru=7/mxf=25000 >mou sy:rsxm26patchE > >;;; Copy files for sysgen phase III >all dl3: >mou dl3:rlutil >pip sy:[*,*]/uf/fo/cd/nv=dl3:[*,*]*.* > >;;; Copy mapped source files >pip sy:[*,*]/uf/fo/cd/nv=db0:[11,10]*.*,dl2:[*,*]*.* >pip sy:[*,*]*.*/pu > >;;; Copy baseline files >pip sy:[*,*]/uf/fo/cd/nv=dl1:[*,*]*.* >pip sy:[*,*]*.*/pu > >;;; Copy listings, maps, customized startup file >pip sy:[*,*]/uf/fo/cd/nv=db0:[11,34]*.*,[1,34]*.*,[1,2]startup.cmd > >;;; Copy the system accounts file >pip sy:[0,0]/fo/cd=db0:[0,0]rsx11.sys >pip sy:[*,*]*.*/pu > >;;;Create bootable system image file >set /uic=[1,54] >pip rsx11m.sys;*/de >pip rsx11m.sys/co/bl:498.=rsx11m.tsk > >res ...at. AT. -- CONTINUING > >; >* 19. Edit SYSVMR.CMD? [Y/N]:y >; >EDI SYSVMR.CMD [00036 LINES READ IN] [PAGE 0] *pf LOA LOA TT: * SET /MAIN=DRVPAR:*:*:SYS * LOA DB: *kill EDI>^Z [EXIT] >ASN SY:=LB: >; >; You will have to run VMR after the command file exits >; since we dont know what is the real system volume. >; >; When the indirect file exits, boot in your target system, >; set the date and time, and save the system with a bootstrap. >; When your system reboots itself, purge the old task files. >; >; >; An alternate version of SYSLIB called ANSLIB has been created >; on the RSXM26 disk to take into account ANSI support and Big-buffering. >; >; Since you have selected ANSI magtape support you may want to >; rebuild PIP and other utilities in SYSGEN phase III to take >; advantage of ANSI support. Note this will cause an increase >; in the size of the utility compared with the non-ANSI version. >; >; Don't forget to create accounts after saving your system >REM LBR >ASN =LB: >; >; End of SYSGEN phase II at 15:30:08 on 31-MAR-19 >; >@ > >asb n db2:=lb: >asn db2:=sy: >ins db:vmr >vmr @sysvmr VMR -- INSTALLED TASKS MAY NO LONGER FIT IN PARTITION SET /TOP=DRVPAR:-* POOL=1200:5818.:05818. LDRPAR 117734 00120000 00002400 MAIN TASK TTPAR 117420 00122400 00040000 MAIN TASK DRVPAR 117074 00162400 00031300 MAIN SYS 117030 00162400 00002000 SUB DRIVER - DB: 116730 00164400 00002600 SUB DRIVER - DD: 116630 00167200 00001100 SUB DRIVER - DK: 116530 00170300 00002000 SUB DRIVER - DL: 116430 00172300 00002300 SUB DRIVER - DM: 116330 00174600 00001100 SUB DRIVER - DT: 116230 00175700 00002400 SUB DRIVER - DY: 116130 00200300 00001300 SUB DRIVER - CR: 116030 00201600 00000600 SUB DRIVER - CT: 115730 00202400 00001100 SUB DRIVER - LP: 115630 00203500 00004200 SUB DRIVER - MM: 115530 00207700 00000500 SUB DRIVER - PP: 115430 00210400 00000300 SUB DRIVER - PR: 115330 00210700 00003000 SUB DRIVER - CO: SYSPAR 115264 00213700 00010000 MAIN TASK FCPPAR 115220 00223700 00050000 MAIN SYS GEN 115154 00273700 00504100 MAIN SYS ...LDR 11D 117634 LDRPAR 248. 00002400 LB0:-00052707 FIXED TKTN 03.95 111554 SYSPAR 248. 00010000 LB0:-00047057 ...RMD V01 114154 GEN 225. 00040000 LB0:-00053744 F11MSG V0010A 113354 GEN 200. 00040000 LB0:-00053553 MTAACP 0010 113254 GEN 200. 00013500 LB0:-00053565 ...DMO 23.00 113654 GEN 160. 00040000 LB0:-00046134 MCR... 02.01 112454 SYSPAR 160. 00010000 LB0:-00053145 ...MOU 22.15 112154 GEN 160. 00040000 LB0:-00046716 ...MCR 01 111654 GEN 160. 00020000 LB0:-00053171 F11ACP M0320 115054 FCPPAR 149. 00047500 LB0:-00053062 COT... 00.01 114754 GEN 145. 00040000 LB0:-00052762 PMD... 05 112654 GEN 140. 00020000 LB0:-00053674 SHF... 04 111754 SYSPAR 105. 00010000 LB0:-00054045 ...INS 04 112754 GEN 100. 00040000 LB0:-00046471 ...SAV 04.22 112054 GEN 100. 00040000 LB0:-00047006 ...UFD V0410 111454 GEN 100. 00040000 LB0:-00047067 QMG... 01.04 114654 GEN 75. 00040000 LB0:-00053307 PRT... 01.01 114354 GEN 70. 00040000 LB0:-00053462 LPP0 1.06A 114254 GEN 70. 00040000 LB0:-00053466 ...AT. 04.25 113154 GEN 65. 00040000 LB0:-00046323 ...ERF 02 113554 GEN 61. 00040000 LB0:-00054254 ...INI 20.01 113054 GEN 60. 00040000 LB0:-00046427 ...QUE 1.0 114554 GEN 50. 00040000 LB0:-00053363 ...PRI 1.0 114454 GEN 50. 00040000 LB0:-00053363 ...ACS 01 114054 GEN 50. 00040000 LB0:-00047125 ...BOO 03.4 113754 GEN 50. 00040000 LB0:-00046106 ERRLOG 02 113454 GEN 50. 00040000 LB0:-00054260 ...LOA 03.3 112554 GEN 50. 00040000 LB0:-00046524 ...HEL 02 112354 GEN 50. 00040000 LB0:-00054150 ...BYE 02.5 112254 GEN 50. 00004000 LB0:-00054142 ...UNL 02.8 111354 GEN 50. 00040000 LB0:-00047076 CR0: LOADED LP0: LOADED PP0: LOADED PR0: LOADED DB0: LOADED DB1: LOADED DB2: LOADED DB3: LOADED DB4: LOADED DB5: LOADED DB6: LOADED DB7: LOADED DD0: LOADED DD1: LOADED DK0: LOADED DK1: LOADED DK2: LOADED DK3: LOADED DK4: LOADED DK5: LOADED DK6: LOADED DK7: LOADED DL0: LOADED DL1: LOADED DL2: LOADED DL3: LOADED DM0: LOADED DM1: LOADED DM2: LOADED DM3: LOADED DM4: LOADED DM5: LOADED DM6: LOADED DM7: LOADED DT0: LOADED DT1: LOADED DT2: LOADED DT3: LOADED DT4: LOADED DT5: LOADED DT6: LOADED DT7: LOADED DY0: LOADED DY1: LOADED CT0: LOADED CT1: LOADED MM0: LOADED MM1: LOADED MM2: LOADED MM3: LOADED CO0: TT0: TT0: LOADED TT1: LOADED TT2: LOADED TT3: LOADED TT4: LOADED TT5: LOADED TT6: LOADED TT7: LOADED TT10: LOADED TT11: LOADED TT12: LOADED TT13: LOADED TT14: LOADED TT15: LOADED TT16: LOADED TT17: LOADED TT20: LOADED NL0: TI0: CL0: TT0: LB0: DB0: SY0: DB0: >tim 31-mar-19 15:35 >set /lower=tt0: >set /nologon > >boo rsx11m XDT: 26 XDT>;g RSX11M V3.2 BL26 > TIM 31-MAR-19 15:38 >SET /LOWER=TT0: >set /nologon >sav/wb RSX-11M V3.2 BL26 1920K MAPPED >RED DB2:=SY: >RED DB2:=LB: >MOU DB2:RSXM26PATCHE >@DB2:[1,2]STARTUP >* Enter date and time ( dd-mmm-yy hh:mm ) [S]: 15:39 >TIM 15:39 >@ >tim 15:39:04 31-MAR-19 >run $shurup INS -- FILE NOT FOUND >run $shutup RSX11M SHUT DOWN PROGRAM ENTER MINUTES TO WAIT BEFORE SHUTDOWN: 0 OK TO SHUTDOWN? [Y/N]: n > >asn lb:=tk: >asn lb:=mp: >set /uic=[1,24] >run $bigtkb INS -- PARTITION PAR14K NOT IN SYSTEM, DEFAULTING TO GEN TKB>@bigindbld TKB>^Z >asn =tk: >asn =mp: > >run $shutup RSX11M SHUT DOWN PROGRAM ENTER MINUTES TO WAIT BEFORE SHUTDOWN: 0 OK TO SHUTDOWN? [Y/N]: y ALL FURTHER LOGINS ARE DISABLED 31-MAR-19 21:51 PLEASE FINISH UP, 0 MINUTES BEFORE SHUTDOWN ALL FURTHER LOGINS ARE DISABLED @LB:[1,2]SHUTUP AT. -- FILE NOT FOUND @LB:[1,2]SHUTUP > DMO DB2:/DEV DMO -- SYSTEM DISMOUNTED FROM DB2: *** FINAL DISMOUNT *** 21:51:35 *** DB2: -- DISMOUNT COMPLETE > Disconnected from the PDP-11 simulator