; SIMH PDP-11 configuration (for doing online sysgen with patched RL01 distribution kit) ; ========================= ; log interaction with simh set log simh.log echo ====================================================================== echo *** SIMH Startup %DATE% %TIME% *** echo ---------------------------------------------------------------------- ; Define the all the devices do pdp_hw_config.ini echo ---------------------------------------------------------------------- ; throttle not needed because idle detect works with RSX-11M ;set THROTTLE 500K set cpu idle ; tape volumes attach -f -r tu2 TPC rsxv32src.tpc set tu3 write attach -f tu3 SIMH memory_dump.tap show tu3 echo ---------------------------------------------------------------------- ; virtual disks ; ; RP0, RP1 are used by the previously generated timesharing system ; Disk now in RP2 will be the new system disk after sysgen set rp0 write set rp1 write set rp2 write attach rp0 Sysgen_BL26.rp06 attach rp1 ods1_userdirs01.rp06 attach rp2 rsx11m_v3.2_patch-E_sysdisk.rp06 ; ; The two disks of the RK05 autopatch kit attach rk0 rsx11m-v32-autopatch-1-2.rk05 attach rk1 rsx11m-v32-autopatch-2-2.rk05 show rk0 show rk1 ; ; The scratch disk and patched distribution kit set rl0 write set rl1 write set rl2 write attach rl0 scratch.rl02 attach rl1 RSX-11M_V3.2_PATCH-E_RSXM26.rl01 attach rl2 RSX-11M_V3.2_PATCH-E_MAPSRC.rl01 ; Connect to the PiDP-11 server set realcons host=localhost set realcons panel=11/70 set realcons interval=1 set realcons connected echo --------------------------------------------------------------------- echo *** Use TELNET to interact with the simulated PDP CONSOLE terminal: show CONSOLE TELNET echo +-------------------------------------------------------------------+ ;echo | Enter a BOOT command to start the simulator: | ;echo | boot rp0 ; boots from the RP06 system disk | ;echo | boot rl0 ; boots from the RL01 install media | ;echo | | echo | NOTE: Ctrl-E at this terminal interrupts the simulator | echo +-------------------------------------------------------------------+ boot rp0