Connected to the PDP-11 simulator CON-TELNET device RSX-11M V3.2 BL26 1920K MAPPED >RED DB:=SY: >RED DB:=LB: >MOU DB:SYSGENBL26 >@DB:[1,2]STARTUP >* PLEASE ENTER TIME AND DATE (HR:MN DD-MMM-YY) [S]: 28-mar-19 10:20 >TIM 28-mar-19 10:20 >* ENTER LINE WIDTH OF THIS TERMINAL [D D:132.]: >SET /BUF=TI:132. >set /pub=db1: >mou db1:USERDIRS >ACS SY:/BLKS=512. >; >; NOTE - The Baseline INDirect must be replaced by BIGIND with >; a priority of 10. for SYSGEN. >; >; ie >REM ...AT. >; >INS $BIGIND/PRI=10. >; >@ > >;;; Examine the autopatch kit >all dk: >mou dk:autopatchE1 >pip dk:[200,200]/li DIRECTORY DK0:[200,200] 28-MAR-19 10:20 AUTOPATCH.DOC;1 168. 15-MAY-81 13:56 AUTOPATCH.CMD;1 69. 15-MAY-81 13:56 TOTAL OF 237./237. BLOCKS IN 2. FILES >;;; Read the autopatch documentation >pip lp:=dk:[200,200]autopatch.doc > >;;; Get information about layered product updates of interest >all dk1: >mou dk1:autopatchE2 >pip lp:=dk1:[*,*]/li >pip lp:=dk1:[245,200]ed2.doc >pip lp:=dk1:[250,200]fort4.doc >pip lp:=dk1:[275,200]rms.doc > >;;; Setup for running autopatch > >;;; Initialize the scratch disk >all dl: >ini dl:scratch >dea dl: > >all dl1: >mou dl1:rsxm26 >pip lp:=dl1:[*,*]/li > >;;; Distribution kit on bitsavers.org is not pristine -- delete detritus >pip dl1:[200,200]syssaved.cmd;*/de > >;;; Setup is complete. Run the autopatch procedure. >tim 10:22:47 28-MAR-19 >asn dl1:=sy: >set /uic=[200,200] >pip sy:=dk:autopatch.cmd >dmo dk: DMO -- TT0: DISMOUNTED FROM DK0: *** FINAL DISMOUNT *** *** DK0: -- DISMOUNT COMPLETE >@[200,200]autopatch >; >; >; AUTOPATCH Rev. E patches only the software for RSX-11M. >; If you wish to patch any layered product software, >; please refer to your cover letter. >; >; >; >; >; RSX-11M V3.2 BL26 Autopatch Revision E Version 1.80 >; >; COPYRIGHT (C) 1981 DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS. >; >; >; >SET /UIC=[1,1] >; >* 1. Have you made a copy of the disk(s) to be patched? [Y/N]:y >; >; Specify the type of RSX-11M V3.2 distribution kit you have by >; responding to the next question with either A, B, or C where: >; >; A -- indicates the big disk distribution kit >; (RK06/RK07, RM02/RM03, RP02/RP03, RP04/RP05/RP06) >; B -- indicates the RL01/RL02 distribution kit >; C -- indicates the dual RK05 distribution kit >; >* 2. What type of distribution kit do you have (A, B, or C) [S]: B >* 3. Do you have a second RL01/RL02 drive to use? [Y/N]:y >* 4. Are you running Autopatch standalone (on the baseline system)? [Y/N]: >* 5. Are you going to SYSGEN a mapped system? [Y/N]:y >* 6. Do you want to patch UNMSRC (unmapped sources)? [Y/N]:y >; >; If you answer Y to the next question, the contents of UIC >; [1,50] will be deleted to provide space for the >; Autopatch files. If you answer N, Autopatch will exit. >; >* 7. Should the contents of UIC [1,50] be deleted? [Y/N]:y >SET /UIC=[1,54] >; >; To provide more space on the baseline disk for Autopatch files, several >; files which are not needed by Autopatch will be copied to a scratch >; disk. These files include [1,54]EDT.TSK,EDI.TSK,ZAP.TSK,VFY.TSK, >; [1,54]PAT.TSK,DMP.TSK,CMP.TSK,BAD.TSK, and [1,51]BADSYS.SYS,BADSYS.STB >; These files will all be restored at the end of the Autopatch >; procedure. Other files in [1,51]*.* will also be deleted and replaced from >; the Autopatch kit. >; >; Please insert a scratch RL01/RL02 into a free RL01/RL02 drive. >; You will be asked to give the internal label of your scratch RL01/RL02 >; >* 8. Enter the label of your scratch RL01/RL02 [S R:1.-9.]: scratch >* 9. Enter the unit number of the drive containing a scratch RL01/RL02 [O]: 0 >MOU DL0:scratch >* 10. Did DL0: mount successfully? [Y/N]:y >; >UFD DL0:[1,51] >UFD DL0:[1,54] >PIP DL0:[1,51]/NV=SY:[1,51]BADSYS.* >PIP DL0:[1,54]/NV=SY:[1,54]EDT.TSK,EDI.TSK,ZAP.TSK,VFY.TSK,PAT.TSK >PIP DL0:[1,54]/NV=SY:[1,54]DMP.TSK,CMP.TSK,BAD.TSK >; >; Now delete copied files from the baseline disk >; >PIP SY:[1,51]*.*;*/DE/NM >PIP SY:[1,54]EDT.TSK;*,EDI.TSK;*,ZAP.TSK;*,VFY.TSK;*,PAT.TSK;*/DE/NM >PIP SY:[1,54]DMP.TSK;*,CMP.TSK;*,BAD.TSK;*/DE/NM >DMO DL0: DMO -- TT0: DISMOUNTED FROM DL0: *** FINAL DISMOUNT *** *** DL0: -- DISMOUNT COMPLETE >; >; Now remove the scratch disk from DL0: >; >SET /UIC=[1,1] >; >; Determine the Autopatch kit device and unit. Place the Autopatch >; medium labeled AUTOPATCHE1 on that unit. The unit should be write >; protected. When the unit is ready respond to the next question. >; >* 11. When ready, enter the Autopatch device and unit (ddu:) [S]: DK0: >MOU DK0:AUTOPATCHE1 >* 12. Did the AUTOPATCHE1 disk mount successfully? [Y/N]:y >; >; Autopatch copies the Autopatch files to temporary UFDs >; in order to perform the Autopatch process. The .MAC >; .OBJ, .OLB, .SYS, and .STB Autopatch files are >; automatically deleted from these UFDs at the end >; of the Autopatch process. >; >* 14. Should .PAT, .COR, .CMD and .ODL Autopatch files be deleted? [Y/N]:y >; >; Determine the second RL01/RL02 unit to use. >; >* 15. What will be your second RL01/RL02 device and unit (ddu:) [S]: DL2: >; >; >; Begin Autopatch process for RSX-11M V3.2 BL26 operating system >; on 28-MAR-19 at 10:24:48. >; >; RL01/RL02 distribution kit >; >; >; Delete [1,50] system files. >; >PIP [1,50]*.*;*/DE/NM >; >; Copy the files from the Autopatch kit to the distribution kit. >; >PIP SY:[*,*]/NV/UF/FO/NM=DK0:[*,60]*.*,[*,64]*.* >; >DMO DK0: DMO -- TT0: DISMOUNTED FROM DK0: *** FINAL DISMOUNT *** *** DK0: -- DISMOUNT COMPLETE >INS $SLP >INS $LBR >ASN SY:=IN: >ASN SY:=OU: >SET /UIC=[1,51] >PIP OU:DSCS8.*;*/DE/NM,PRESRV.*;* >PIP OU:/NV/CO/BL:98.=[63,60]DSCS8.SYS >PIP OU:/NV/CO/BL:98.=[163,60]DSCS16.SYS >PIP OU:/NV/CO/BL:66.=[41,60]PRESRV.SYS >PIP OU:/NV=[63,60]DSCS8.STB,[41,60]PRESRV.STB >PIP OU:/NV=[163,60]DSCS16.STB >SET /UIC=[1,1] >LBR OU:SYSLIB/RP=[50,60]CONTRL,PNTMRK MODULE "CONTRL" REPLACED MODULE "PNTMRK" REPLACED >LBR OU:SYSLIB/RP=[52,60]CRGF,ELGF,CNMRK,DSCKP,ENAST,ENCKP MODULE "CRGF " REPLACED MODULE "ELGF " REPLACED MODULE ".CNMRK" REPLACED MODULE ".DSCKP" REPLACED MODULE ".ENAST" REPLACED MODULE ".ENCKP" REPLACED >LBR OU:SYSLIB/RP=[52,60]INAST,SPSUB,WFLOR,[55,60]OVCTR MODULE ".INAST" REPLACED MODULE "SPSUB " REPLACED MODULE ".WFLOR" REPLACED MODULE "OVCTR " REPLACED >PIP OU:KMCLP.BIN/NV=[1,60]KMCLP.OLB >PIP OU:PURPCS.OBJ;*/DE/NM >PIP OU:/NV=[1,60]PURPCS.OBJ >PIP OU:ODT.OBJ;*/DE/NM >PIP OU:/NV=[47,60]ODT.OBJ >PIP [1,24]/NV=[50,64]FCSRS1.CMD,FCSRS1BLD.CMD >PIP OU:[50,64]FCSRS1.CMD;*/DE/NM,FCSRS1BLD.CMD;* >PIP [1,24]/NV=[50,64]FCSRS1BLD.ODL >PIP OU:[50,64]FCSRS1BLD.ODL;*/DE/NM >SET /UIC=[200,200] >SLP @[200,60]SYSGEN.COR >SLP @[200,60]SYSGEN2.COR >PIP OU:SYSGEN.CMD/PU,SYSGEN2 >PIP OU:=[200,60]EMDRV.CMD >SLP @[200,60]SGNEXEC.COR >PIP OU:SGNEXEC.CMD/PU >SLP @[200,60]SGNIP.COR >PIP OU:SGNIP.CMD/PU >SLP @[200,60]SGNICIS.COR >PIP OU:SGNICIS.CMD/PU >SLP @[200,60]SGNPER.COR >PIP OU:SGNPER.CMD/PU >; >; Now place the RLUTIL in DL2:. The drive should be write >; enabled. >; >* 16. Is the RLUTIL disk ready in DL2:? [Y/N]:y >MOU DL2:RLUTIL >* 17. Did the RLUTIL mount successfully? [Y/N]:y >ASN DL2:=IN: >ASN DL2:=OU: >SET /UIC=[1,1] >PIP OU:[1,50]*.*;*/DE/NM >PIP [200,200]/NV=OU:[12,10]SAVE.MAC,INIPAR,SPROVFDT,SPROV,SDSOV,SDSOVFDT >PIP OU:[12,10]SAVE.MAC;*/DE/NM,INIPAR;*,SPROVFDT;*,SPROV;*,SDSOV;*,SDSOVFDT;* >SET /UIC=[1,20] >PIP OU:SLOTKBBLD.ODL;*/DE/NM,SYEBLD.ODL;*,CDA.OLB;*,EDIBLD.CMD;*,EDTBLD.ODL;* >PIP OU:/NV=[1,60]SLOTKBBLD.ODL >PIP OU:/NV=[1,60]SYEBLD.ODL >PIP OU:/NV=[1,60]CDA.OLB >PIP OU:/NV=[1,60]EDIBLD.CMD >PIP OU:/NV=[1,60]EDTBLD.ODL >LBR OU:TKB/-EP/RP=[31,60]P2POP,SGALO,STINP MODULE "P2POP " REPLACED MODULE "SGALO " REPLACED MODULE "STINP " REPLACED >LBR OU:PIP/RP=[32,60]PIPCPY,PIPDEL MODULE "PIPCPY" REPLACED MODULE "PIPDEL" REPLACED >LBR OU:FLX/RP=[33,60]DOSRSX MODULE "DOSRSX" REPLACED >LBR OU:DSC/RP=[36,60]TINO MODULE "TINO " REPLACED >LBR OU:LBR/RP=[42,60]LBRCM,LBRIN,LBRWHD MODULE "LBRCM " REPLACED MODULE "LBRIN " REPLACED MODULE "LBRWHD" REPLACED >LBR OU:BAD/RP=[62,60]BADBLK MODULE "BADBLK" REPLACED >LBR OU:FTB/RP=[106,60]P3MDS,P4MAL MODULE "P3MDS " REPLACED MODULE "P4MAL " REPLACED >PIP OU:VMR.OLB;*/DE/NM >PIP OU:FMT.OLB;*/DE/NM >PIP OU:/NV=[1,60]VMR.OLB,FMT >PIP OU:BRU.OLB;*/DE/NM >PIP OU:/NV=[1,60]BRU.OLB >SET /UIC=[1,24] >PIP OU:BRUBLD.CMD;*/DE/NM >PIP OU:/NV=[1,64]BRUBLD.CMD >SET /UIC=[1,24] >PIP OU:EDIBLD.CMD;*/DE/NM,CDABLD.CMD;* >PIP OU:/NV=[1,64]EDIBLD.CMD,CDABLD.CMD >SET /UIC=[12,10] >LBR OU:MCR1.COR=[11,60]CONCAT.ULB/EX:MCR1 >SLP @OU:MCR1.COR >PIP OU:INIGCL.MAC/PU,BYE,CLQOV >LBR OU:MCR2.COR=[11,60]CONCAT.ULB/EX:MCR2 >SLP @OU:MCR2.COR >PIP OU:FLAOV.MAC/PU,MCROV,DISMNT >LBR OU:MCR3.COR=[11,60]CONCAT.ULB/EX:MCR3 >SLP @OU:MCR3.COR >PIP OU:HELLO.MAC/PU,MDISOV,MMTOV >LBR OU:MCR4.COR=[11,60]CONCAT.ULB/EX:MCR4 >SLP @OU:MCR4.COR >PIP OU:MOUPAR.MAC/PU,MPARMT,RPSOV,MCRDIS >LBR OU:MCR5.COR=[11,60]CONCAT.ULB/EX:MCR5 >SLP @OU:MCR5.COR >PIP OU:FIXOV.MAC/PU,SPCDRV,SAVSIZ,SAVDX >LBR OU:MCR6.COR=[11,60]CONCAT.ULB/EX:MCR6 >SLP @OU:MCR6.COR >PIP OU:SETOVFDT.MAC/PU,TKTN,MOUROT >LBR OU:MCR7.COR=[11,60]CONCAT.ULB/EX:MCR7 >SLP @OU:MCR7.COR >PIP OU:SAVINS.MAC/PU,SAVSUB,SETOV >SLP @[12,60]INDPAR.COR >PIP OU:INDPAR.MAC/PU >PIP OU:*.COR;*/DE/NM >SET /UIC=[14,10] >PIP OU:[14,20]/NV=[14,60]RMDASM.CMD >PIP OU:[14,24]/NV=[14,64]RMDASM.CMD >SLP @[14,60]MDPAGE.COR >PIP OU:MDPAGE.MAC/PU >SLP @[14,60]RMDRIV.COR >PIP OU:RMDRIV.MAC/PU >SET /UIC=[15,10] >SLP @[15,60]SHUTUP.COR >SLP @[15,60]BROAD.COR >PIP OU:SHUTUP.MAC/PU,BROAD >SLP @[15,60]ACNT.COR >PIP OU:ACNT.MAC/PU >SET /UIC=[45,10] >SLP @[45,60]KADGCH.COR >SLP @[45,60]KADINP.COR >PIP OU:KADGCH.MAC/PU,KADINP >SLP @[45,60]KGHIST.COR >SLP @[45,60]KSTADC.COR >PIP OU:KGHIST.MAC/PU,KSTADC >SLP @[45,60]KBFSTS.COR >PIP OU:KBFSTS.MAC/PU >SET /UIC=[200,200] >SLP @[200,60]FCSRES.COR >PIP OU:FCSRES.MAC/PU >SLP @[200,60]SYSGEN3.COR >PIP OU:SYSGEN3.CMD/PU >SLP @[200,60]SGNKLAB.COR >PIP OU:SGNKLAB.CMD/PU >SET /UIC=[1,1] >PIP OU:[12,10]/NV/FO=[200,200]SAVE.MAC,INIPAR,SPROVFDT,SPROV,SDSOV,SDSOVFDT >PIP [200,200]SPROVFDT.MAC;*/DE/NM,SPROV.MAC;*,SAVE.MAC;*,INIPAR.MAC;* >PIP [200,200]SDSOVFDT.MAC;*/DE/NM,SDSOV.MAC;* >DMO DL2:RLUTIL DMO -- TT0: DISMOUNTED FROM DL2: *** FINAL DISMOUNT *** *** DL2: -- DISMOUNT COMPLETE >; >; Remove the RLUTIL disk from DL2: and replace it with the >; UNMSRC disk. The drive should be write enabled. >; >* 18. Is the UNMSRC disk ready in DL2:? [Y/N]:y >MOU DL2:UNMSRC >* 19. Did the UNMSRC mount successfully? [Y/N]:y >SET /UIC=[1,1] >PIP OU:[1,51]*.*;*/DE/NM >PIP [200,200]/NV=OU:[11,10]DRQIO.MAC,LSDRV,DRMAP,UDDRV,XQDRV,XUDRV >PIP [200,200]/NV=OU:[11,10]XWDRV.MAC,XPDRV >PIP OU:[11,10]DRQIO.*;*/DE/NM,LSDRV.*;*,DRMAP.*;*,UDDRV.*;*,XQDRV.*;* >PIP OU:[11,10]XUDRV.*;*/DE/NM,XWDRV.*;*,XPDRV.*;* >SET /UIC=[1,51] >PIP OU:DSCS8.*;*/DE/NM,PRESRV.*;* >PIP OU:/NV/CO/BL:98.=[63,60]DSCS8.SYS >PIP OU:/NV/CO/BL:98.=[163,60]DSCS16.SYS >PIP OU:/NV/CO/BL:66.=[41,60]PRESRV.SYS >PIP OU:/NV=[63,60]DSCS8.STB,[41,60]PRESRV.STB >PIP OU:/NV=[163,60]DSCS16.STB >SET /UIC=[1,1] >LBR OU:SYSLIB/RP=[50,60]CONTRL,PNTMRK MODULE "CONTRL" REPLACED MODULE "PNTMRK" REPLACED >LBR OU:SYSLIB/RP=[52,60]CRGF,ELGF,CNMRK,DSCKP,ENAST,ENCKP MODULE "CRGF " REPLACED MODULE "ELGF " REPLACED MODULE ".CNMRK" REPLACED MODULE ".DSCKP" REPLACED MODULE ".ENAST" REPLACED MODULE ".ENCKP" REPLACED >LBR OU:SYSLIB/RP=[52,60]INAST,SPSUB,WFLOR,[55,60]OVCTR MODULE ".INAST" REPLACED MODULE "SPSUB " REPLACED MODULE ".WFLOR" REPLACED MODULE "OVCTR " REPLACED >PIP OU:KMCLP.BIN/NV=[1,60]KMCLP.OLB >PIP OU:PURPCS.OBJ;*/DE/NM >PIP OU:/NV=[1,60]PURPCS.OBJ >PIP OU:ODT.OBJ;*/DE/NM >PIP OU:/NV=[47,60]ODT.OBJ >SET /UIC=[1,20] >LBR OU:INI/RP=[12,60]INIGCL/-EP MODULE "INIGCL" REPLACED >LBR OU:FCP/RP=[13,60]CLDELFCP,INWIN,WTRN1FCP MODULE "CLDEL " REPLACED MODULE "INWIN " REPLACED MODULE "WTRN1 " REPLACED >LBR OU:FCPNMH/RP=[13,60]CLDELNMH,WTRN1NMH MODULE "CLDEL " REPLACED MODULE "WTRN1 " REPLACED >LBR OU:RMD/RP/-EP=[14,60]MDPAGE,RMDRIV MODULE "MDPAGE" REPLACED MODULE "RMDRIV" REPLACED >LBR OU:MOU/RP=[12,60]MDISOV,MMTOV,MOUPAR,MPARMT MODULE "MDISOV" REPLACED MODULE "MMTOV " REPLACED MODULE "MOUPAR" REPLACED MODULE "MPARMT" REPLACED >LBR OU:PMD/RP=[15,60]DUMP2 MODULE "DUMP2 " REPLACED >LBR OU:MTA/RP=[22,60]MMOMSG,MMSG,MEXMSG,MTOMSG,MMTMSG MODULE "MMOMSG" REPLACED MODULE "MMSG " REPLACED MODULE "MEXMSG" REPLACED MODULE "MTOMSG" REPLACED MODULE "MMTMSG" REPLACED >LBR OU:F11MSG/RP=[64,60]F11MSG MODULE "F11MSG" REPLACED >LBR OU:MLTUSR/RP=[15,60]ACNT,BROAD,SHUTUP MODULE "ACNT " REPLACED MODULE "BROADC" REPLACED MODULE "SHUTUP" REPLACED >LBR OU:IND/RP=[12,60]INDPAR MODULE "INDPAR" REPLACED >PIP OU:F11MSGBLD.CMD;*/DE/NM >PIP OU:/NV=[1,60]F11MSGBLD.CMD >PIP OU:BOOBLD.CMD;*/DE/NM,SAVBLD.CMD;* >PIP OU:/NV=[1,60]BOOBLD.CMD,SAVBLD >PIP OU:LAINIT.OLB;*/DE/NM >PIP OU:/NV=[1,60]LAINIT.OLB >PIP OU:SAV.OLB;*/DE/NM >PIP OU:MCR.OLB;*/DE/NM >PIP OU:/NV=[1,60]MCR.OLB,SAV >SET /UIC=[11,10] >LBR OU:EXC1.COR=[11,60]CONCAT.ULB/EX:EXC1 >SLP @OU:EXC1.COR >PIP OU:BFCTL.MAC/PU,REQSB,SYTAB >LBR OU:EXC2.COR=[11,60]CONCAT.ULB/EX:EXC2 >SLP @OU:EXC2.COR >PIP OU:CRASH.MAC/PU,DRCMT,DRDSP >LBR OU:EXC3.COR=[11,60]CONCAT.ULB/EX:EXC3 >SLP @OU:EXC3.COR >PIP OU:DRASG.MAC/PU,DREIF,DRREG >LBR OU:EXC4.COR=[11,60]CONCAT.ULB/EX:EXC4 >SLP @OU:EXC4.COR >PIP OU:DRGEF.MAC/PU,DRSED,DRSPW >LBR OU:EXC5.COR=[11,60]CONCAT.ULB/EX:EXC5 >SLP @OU:EXC5.COR >PIP OU:INITL.MAC/PU,IOSUB,LOADR >LBR OU:EXC6.COR=[11,60]CONCAT.ULB/EX:EXC6 >SLP @OU:EXC6.COR >PIP OU:ERROR.MAC/PU,LOWCR,SYSXT >LBR OU:EXC7.COR=[11,60]CONCAT.ULB/EX:EXC7 >SLP @OU:EXC7.COR >PIP OU:DREXP.MAC/PU >PIP OU:*.COR;*/DE/NM >LBR OU:DRV1.COR=[11,60]CONCAT.ULB/EX:DRV1 >SLP @OU:DRV1.COR >PIP OU:DLDRV.MAC/PU,DMDRV,DRDRV >LBR OU:DRV2.COR=[11,60]CONCAT.ULB/EX:DRV2 >SLP @OU:DRV2.COR >PIP OU:MTDRV.MAC/PU,TTATT,TTFP >LBR OU:DRV3.COR=[11,60]CONCAT.ULB/EX:DRV3 >SLP @OU:DRV3.COR >PIP OU:TTMIS.MAC/PU,TTMOD,TTODN,TTRW,TTTBL,TTYZ >LBR OU:DRV4.COR=[11,60]CONCAT.ULB/EX:DRV4 >SLP @OU:DRV4.COR >PIP OU:TTOIS.MAC/PU,TTSUB,TTYH >LBR OU:DRV5.COR=[11,60]CONCAT.ULB/EX:DRV5 >SLP @OU:DRV5.COR >PIP OU:CRDRV.MAC/PU,DBDRV,ICDRV >LBR OU:DRV6.COR=[11,60]CONCAT.ULB/EX:DRV6 >SLP @OU:DRV6.COR >PIP OU:DYDRV.MAC/PU,MMDRV,IPDRV >LBR OU:DRV7.COR=[11,60]CONCAT.ULB/EX:DRV7 >SLP @OU:DRV7.COR >PIP OU:LADRV.MAC/PU,LKDRV,LPDRV >PIP OU:MSDRV.MAC;*/DE/NM >PIP OU:MSDRV.MAC;2/NV=[11,60]MSDRV.MAC >LBR OU:DRV8.COR=[11,60]CONCAT.ULB/EX:DRV8 >SLP @OU:DRV8.COR >PIP OU:MSDRV.MAC/PU,TTDRV,XMDRV >LBR OU:DRV9.COR=[11,60]CONCAT.ULB/EX:DRV9 >SLP @OU:DRV9.COR >PIP OU:XBDRV.MAC/PU,ISDRV,DDDRV,DXDRV >LBR OU:DRV10.COR=[11,60]CONCAT.ULB/EX:DRV10 >SLP @OU:DRV10.COR >PIP OU:TTCAN.MAC/PU,TTDAT,TTINI >LBR OU:DRV11.COR=[11,60]CONCAT.ULB/EX:DRV11 >SLP @OU:DRV11.COR >PIP OU:TTICH.MAC/PU,TTMAC >PIP OU:*.COR;*/DE/NM >PIP OU:=[11,60]EMDRV.MAC,EMTAB.MAC >SET /UIC=[200,200] >SLP @[200,60]SYSGEN.COR >SLP @[200,60]SYSGEN2.COR >PIP OU:SYSGEN.CMD/PU,SYSGEN2 >PIP OU:=[200,60]EMDRV.CMD >SLP @[200,60]SGNEXEC.COR >PIP OU:SGNEXEC.CMD/PU >SLP @[200,60]SGNIP.COR >PIP OU:SGNIP.CMD/PU >SLP @[200,60]SGNICIS.COR >PIP OU:SGNICIS.CMD/PU >SLP @[200,60]SGNPER.COR >PIP OU:SGNPER.CMD/PU >SLP @[200,60]FCSRES.COR >PIP OU:FCSRES.MAC/PU >SET /UIC=[1,1] >PIP OU:[11,10]/NV/FO=[200,200]DRQIO.MAC,LSDRV,DRMAP,UDDRV,XQDRV,XUDRV >PIP OU:[11,10]/NV/FO=[200,200]XWDRV.MAC,XPDRV >PIP [200,200]DRQIO.*;*/DE/NM,LSDRV.*;*,DRMAP.*;*,UDDRV.*;*,XQDRV.*;* >PIP [200,200]XUDRV.*;*/DE/NM,XWDRV.*;*,XPDRV.*;* >DMO DL2:UNMSRC DMO -- TT0: DISMOUNTED FROM DL2: *** FINAL DISMOUNT *** *** DL2: -- DISMOUNT COMPLETE >; >; Remove the UNMSRC disk from DL2: and replace it with the >; MAPSRC disk. The drive should be write enabled. >; >* 20. Is the MAPSRC disk ready in DL2:? [Y/N]:y >MOU DL2:MAPSRC >* 21. Did the MAPSRC mount successfully? [Y/N]:y >SET /UIC=[1,1] >PIP OU:[1,51]*.*;*/DE/NM >PIP OU:[1,54]EDT.TSK;*/DE,ZAP.TSK;*,CMP.TSK;* >PIP [200,200]/NV=OU:[11,10]DRQIO.MAC,LSDRV,DRMAP,UDDRV,XQDRV,XUDRV >PIP [200,200]/NV=OU:[11,10]XWDRV.MAC,XPDRV >PIP OU:[11,10]DRQIO.*;*/DE/NM,LSDRV.*;*,DRMAP.*;*,UDDRV.*;*,XQDRV.*;* >PIP OU:[11,10]XUDRV.*;*/DE/NM,XWDRV.*;*,XPDRV.*;* >LBR OU:SYSLIB/RP=[50,60]CONTRL,PNTMRK MODULE "CONTRL" REPLACED MODULE "PNTMRK" REPLACED >LBR OU:SYSLIB/RP=[52,60]CRGF,ELGF,CNMRK,DSCKP,ENAST,ENCKP MODULE "CRGF " REPLACED MODULE "ELGF " REPLACED MODULE ".CNMRK" REPLACED MODULE ".DSCKP" REPLACED MODULE ".ENAST" REPLACED MODULE ".ENCKP" REPLACED >LBR OU:SYSLIB/RP=[52,60]INAST,SPSUB,WFLOR,[55,60]OVCTR MODULE ".INAST" REPLACED MODULE "SPSUB " REPLACED MODULE ".WFLOR" REPLACED MODULE "OVCTR " REPLACED >PIP OU:KMCLP.BIN/NV=[1,60]KMCLP.OLB >PIP OU:PURPCS.OBJ;*/DE/NM >PIP OU:/NV=[1,60]PURPCS.OBJ >PIP OU:ODT.OBJ;*/DE/NM >PIP OU:/NV=[47,60]ODT.OBJ >SET /UIC=[1,24] >LBR OU:FCP/RP=[13,60]CLDELFCP,INWIN,WTRN1FCP MODULE "CLDEL " REPLACED MODULE "INWIN " REPLACED MODULE "WTRN1 " REPLACED >LBR OU:FCPNMH/RP=[13,60]CLDELNMH,WTRN1NMH MODULE "CLDEL " REPLACED MODULE "WTRN1 " REPLACED >LBR OU:INI/RP=[12,64]INIGCL/-EP MODULE "INIGCL" REPLACED >LBR OU:MOU/RP=[12,64]MDISOV,MMTOV,MOUPAR,MPARMT MODULE "MDISOV" REPLACED MODULE "MMTOV " REPLACED MODULE "MOUPAR" REPLACED MODULE "MPARMT" REPLACED >LBR OU:PMD/RP=[15,64]DUMP2 MODULE "DUMP2 " REPLACED >LBR OU:LPP/RP=[121,64]FILPRO,JOBSTR,PRTDN,RECEIV,IOPRT,JOBEND MODULE "FILPRO" REPLACED MODULE "JOBSTR" REPLACED MODULE "PRTDN " REPLACED MODULE "RECEIV" REPLACED MODULE "IOPRT " REPLACED MODULE "JOBEND" REPLACED >LBR OU:QMG/RP=[25,64]QMGSTA,QMGMOJ,QMGRSY MODULE "QMGSTA" REPLACED MODULE "QMGMOJ" REPLACED MODULE "QMGRSY" REPLACED >LBR OU:QMGCLI/RP=[25,64]QUE3,SHOWQ MODULE "QUE3 " REPLACED MODULE "SHOWQ " REPLACED >LBR OU:RMD/RP/-EP=[14,64]MDPAGE,RMDRIV MODULE "MDPAGE" REPLACED MODULE "RMDRIV" REPLACED >LBR OU:MTA/RP=[22,60]MMOMSG,MMSG,MEXMSG,MTOMSG,MMTMSG MODULE "MMOMSG" REPLACED MODULE "MMSG " REPLACED MODULE "MEXMSG" REPLACED MODULE "MTOMSG" REPLACED MODULE "MMTMSG" REPLACED >LBR OU:F11MSG/RP=[64,60]F11MSG MODULE "F11MSG" REPLACED >LBR OU:MLTUSR/RP=[15,60]ACNT,BROAD,SHUTUP MODULE "ACNT " REPLACED MODULE "BROADC" REPLACED MODULE "SHUTUP" REPLACED >LBR OU:IND/RP=[12,64]INDPAR MODULE "INDPAR" REPLACED >PIP OU:ACNTBLD.CMD;*/DE/NM,F11MSGBLD.CMD;* >PIP OU:/NV=[1,64]ACNTBLD.CMD >PIP OU:/NV=[1,64]F11MSGBLD.CMD >PIP OU:BOOBLD.CMD;*/DE/NM,SAVBLD.CMD;* >PIP OU:/NV=[1,64]BOOBLD.CMD,SAVBLD >PIP OU:MCRTTFD.OBJ;*/DE/NM >PIP OU:/NV=[12,64]MCRTTFD.OBJ >PIP OU:MCR.OLB;*/DE/NM >PIP OU:SAV.OLB;*/DE/NM >PIP OU:/NV=[1,64]MCR.OLB,SAV >PIP OU:LAINIT.OLB;*/DE/NM >PIP OU:/NV=[1,60]LAINIT.OLB >SET /UIC=[11,10] >LBR OU:EXC1.COR=[11,60]CONCAT.ULB/EX:EXC1 >SLP @OU:EXC1.COR >PIP OU:BFCTL.MAC/PU,REQSB,SYTAB >LBR OU:EXC2.COR=[11,60]CONCAT.ULB/EX:EXC2 >SLP @OU:EXC2.COR >PIP OU:CRASH.MAC/PU,DRCMT,DRDSP >LBR OU:EXC3.COR=[11,60]CONCAT.ULB/EX:EXC3 >SLP @OU:EXC3.COR >PIP OU:DRASG.MAC/PU,DREIF,DRREG >LBR OU:EXC4.COR=[11,60]CONCAT.ULB/EX:EXC4 >SLP @OU:EXC4.COR >PIP OU:DRGEF.MAC/PU,DRSED,DRSPW >LBR OU:EXC5.COR=[11,60]CONCAT.ULB/EX:EXC5 >SLP @OU:EXC5.COR >PIP OU:INITL.MAC/PU,IOSUB,LOADR >LBR OU:EXC6.COR=[11,60]CONCAT.ULB/EX:EXC6 >SLP @OU:EXC6.COR >PIP OU:ERROR.MAC/PU,LOWCR,SYSXT >LBR OU:EXC7.COR=[11,60]CONCAT.ULB/EX:EXC7 >SLP @OU:EXC7.COR >PIP OU:DREXP.MAC/PU >PIP OU:*.COR;*/DE/NM >LBR OU:DRV1.COR=[11,60]CONCAT.ULB/EX:DRV1 >SLP @OU:DRV1.COR >PIP OU:DLDRV.MAC/PU,DMDRV,DRDRV >LBR OU:DRV2.COR=[11,60]CONCAT.ULB/EX:DRV2 >SLP @OU:DRV2.COR >PIP OU:MTDRV.MAC/PU,TTATT,TTFP >LBR OU:DRV3.COR=[11,60]CONCAT.ULB/EX:DRV3 >SLP @OU:DRV3.COR >PIP OU:TTMIS.MAC/PU,TTMOD,TTODN,TTRW,TTTBL,TTYZ >LBR OU:DRV4.COR=[11,60]CONCAT.ULB/EX:DRV4 >SLP @OU:DRV4.COR >PIP OU:TTOIS.MAC/PU,TTSUB,TTYH >LBR OU:DRV5.COR=[11,60]CONCAT.ULB/EX:DRV5 >SLP @OU:DRV5.COR >PIP OU:CRDRV.MAC/PU,DBDRV,ICDRV >LBR OU:DRV6.COR=[11,60]CONCAT.ULB/EX:DRV6 >SLP @OU:DRV6.COR >PIP OU:DYDRV.MAC/PU,MMDRV,IPDRV >LBR OU:DRV7.COR=[11,60]CONCAT.ULB/EX:DRV7 >SLP @OU:DRV7.COR >PIP OU:LADRV.MAC/PU,LKDRV,LPDRV >PIP OU:MSDRV.MAC;*/DE/NM >PIP OU:MSDRV.MAC;2/NV=[11,60]MSDRV.MAC >LBR OU:DRV8.COR=[11,60]CONCAT.ULB/EX:DRV8 >SLP @OU:DRV8.COR >PIP OU:MSDRV.MAC/PU,TTDRV,XMDRV >LBR OU:DRV9.COR=[11,60]CONCAT.ULB/EX:DRV9 >SLP @OU:DRV9.COR >PIP OU:XBDRV.MAC/PU,ISDRV,DDDRV,DXDRV >LBR OU:DRV10.COR=[11,60]CONCAT.ULB/EX:DRV10 >SLP @OU:DRV10.COR >PIP OU:TTCAN.MAC/PU,TTDAT,TTINI >LBR OU:DRV11.COR=[11,60]CONCAT.ULB/EX:DRV11 >SLP @OU:DRV11.COR >PIP OU:TTICH.MAC/PU,TTMAC >PIP OU:*.COR;*/DE/NM >PIP OU:=[11,60]EMDRV.MAC,EMTAB.MAC >SET /UIC=[200,200] >SLP @[200,60]SYSGEN.COR >SLP @[200,60]SYSGEN2.COR >PIP OU:SYSGEN.CMD/PU,SYSGEN2 >PIP OU:=[200,60]EMDRV.CMD >SLP @[200,60]SGNEXEC.COR >PIP OU:SGNEXEC.CMD/PU >SLP @[200,60]SGNIP.COR >PIP OU:SGNIP.CMD/PU >SLP @[200,60]SGNICIS.COR >PIP OU:SGNICIS.CMD/PU >SLP @[200,60]SGNPER.COR >PIP OU:SGNPER.CMD/PU >SLP @[200,60]FCSRES.COR >PIP OU:FCSRES.MAC/PU >SET /UIC=[1,1] >PIP OU:[11,10]/NV/FO=[200,200]DRQIO.MAC,LSDRV,DRMAP,UDDRV,XQDRV,XUDRV >PIP OU:[11,10]/NV/FO=[200,200]XWDRV.MAC,XPDRV >PIP [200,200]DRQIO.*;*/DE/NM,LSDRV.*;*,DRMAP.*;*,UDDRV.*;*,XQDRV.*;* >PIP [200,200]XUDRV.*;*/DE/NM,XWDRV.*;*,XPDRV.*;* >DMO DL2:MAPSRC DMO -- TT0: DISMOUNTED FROM DL2: *** FINAL DISMOUNT *** *** DL2: -- DISMOUNT COMPLETE >ASN =IN: >ASN =OU: >; >; >; >; Delete the Autopatch files. >; >PIP [1,60]*.*;*/DE/NM >PIP [1,64]*.*;*/DE/NM >PIP [11,60]*.*;*/DE/NM >PIP [12,60]*.*;*/DE/NM >PIP [12,64]*.*;*/DE/NM >PIP [13,60]*.*;*/DE/NM >PIP [14,60]*.*;*/DE/NM >PIP [14,64]*.*;*/DE/NM >PIP [15,60]*.*;*/DE/NM >PIP [15,64]*.*;*/DE/NM >PIP [22,60]*.*;*/DE/NM >PIP [25,64]*.*;*/DE/NM >PIP [31,60]*.*;*/DE/NM >PIP [32,60]*.*;*/DE/NM >PIP [33,60]*.*;*/DE/NM >PIP [36,60]*.*;*/DE/NM >PIP [41,60]*.*;*/DE/NM >PIP [42,60]*.*;*/DE/NM >PIP [45,60]*.*;*/DE/NM >PIP [47,60]*.*;*/DE/NM >PIP [50,60]*.*;*/DE/NM >PIP [50,64]*.*;*/DE/NM >PIP [52,60]*.*;*/DE/NM >PIP [55,60]*.*;*/DE/NM >PIP [62,60]*.*;*/DE/NM >PIP [63,60]*.*;*/DE/NM >PIP [64,60]*.*;*/DE/NM >PIP [70,60]*.*;*/DE/NM >PIP [74,60]*.*;*/DE/NM >PIP [106,60]*.*;*/DE/NM >PIP [112,60]*.*;*/DE/NM >PIP [121,60]*.*;*/DE/NM >PIP [121,64]*.*;*/DE/NM >PIP [163,60]*.*;*/DE/NM >PIP [200,60]*.*;*/DE/NM >; >; Delete empty UFD's >; >PIP [0,0]011060.DIR;*/DE/NM,012060.DIR;*,012064.DIR;*,013060.DIR;* >PIP [0,0]014060.DIR;*/DE/NM,014064.DIR;*,015060.DIR;*,015064.DIR;* >PIP [0,0]022060.DIR;*/DE/NM,025064.DIR;*,032060.DIR;*,033060.DIR;* >PIP [0,0]036060.DIR;*/DE/NM,041060.DIR;*,042060.DIR;*,047060.DIR;* >PIP [0,0]050060.DIR;*/DE/NM,050064.DIR;*,052060.DIR;*,055060.DIR;* >PIP [0,0]062060.DIR;*/DE/NM,063060.DIR;*,106060.DIR;*,121060.DIR;* >PIP [0,0]121064.DIR;*/DE/NM,163060.DIR;*,200060.DIR;* >PIP [0,0]001060.DIR;*/DE/NM,001064.DIR;*,031060.DIR;*,064060.DIR;* >PIP [0,0]070060.DIR;*/DE/NM,074060.DIR;*,112060.DIR;* >; >; >; Please put the scratch disk labelled, scratch, into DL0: so that >; the files which were temporarily saved there may be restored. >; >* 22. Is the scratch RL01/RL02, scratch, ready in DL0:? [Y/N]:y >MOU DL0:scratch >* 23. Did DL0: mount successfully? [Y/N]:y >SET /UIC=[1,54] >PIP [1,54]=DL0:[1,54]EDT.TSK,EDI.TSK,ZAP.TSK,VFY.TSK,PAT.TSK >PIP [1,54]=DL0:[1,54]DMP.TSK,CMP.TSK,BAD.TSK >PIP [1,51]=DL0:[1,51]BADSYS.* >DMO DL0: DMO -- TT0: DISMOUNTED FROM DL0: *** FINAL DISMOUNT *** *** DL0: -- DISMOUNT COMPLETE >REM SLP >REM LBR >; >; Finished with Autopatch process for RSX-11M V3.2 BL26 operating >; system software on 28-MAR-19 at 10:29:33. >; >; >; >; >; >; Upon completion of Autopatch, [200,200]AUTOPATCH.*;* >; should be deleted from the baseline disk (RSXM26). >; This will provide additional space for completing the >; SYSGEN. >; >; >; Autopatch exiting. >; >SET /UIC=[200,200] >@ > >dea dk: >dmo dk1: DMO -- TT0: DISMOUNTED FROM DK1: *** FINAL DISMOUNT *** *** DK1: -- DISMOUNT COMPLETE >dea dk1: >asn =sy: >dmo dl1: DMO -- TT0: DISMOUNTED FROM DL1: *** FINAL DISMOUNT *** *** DL1: -- DISMOUNT COMPLETE >dea dl1: >run $shutup RSX11M SHUT DOWN PROGRAM ENTER MINUTES TO WAIT BEFORE SHUTDOWN: 0 OK TO SHUTDOWN? [Y/N]: y ALL FURTHER LOGINS ARE DISABLED 28-MAR-19 10:33 PLEASE FINISH UP, 0 MINUTES BEFORE SHUTDOWN  @LB:[1,2]SHUTUP AT. -- FILE NOT FOUND @LB:[1,2]SHUTUP > ACS DB0:/BLKS=0. ACS -- CHECKPOINT FILE NOW INACTIVE > DMO DB0:/DEV DMO -- SYSTEM DISMOUNTED FROM DB0: *** FINAL DISMOUNT *** *** DB0: -- DISMOUNT COMPLETE > DMO DB1:/DEV DMO -- SYSTEM DISMOUNTED FROM DB1: *** FINAL DISMOUNT *** *** DB1: -- DISMOUNT COMPLETE > Disconnected from the PDP-11 simulator